BattWiseR-value targets by climate zone, and what it takes to hit them.

How much does it cost to insulate a 1000 sq ft attic in Manchester, NH?

Blown-in attic insulation in Manchester, NH
$1,861
1,000 ft² of attic floor · typical range $979 – $2,742
Typical total$1.86 per ft² of attic floor$1,861
Range you should see in bidsthree bids on the same scope normally land inside this$979 – $2,742
Labor portion45% of the job — this is the part that moves by city$837
Material portion55% — bought at national prices$1,023
Insulation Workers, Floor, Ceiling, and Wall pay near ManchesterBLS does not publish a metro figure for insulation workers, floor, ceiling, and wall near Manchester, NH, so this is the New Hampshire state average, SOC 47-2131$52,220/yr
U.S. mean for the same tradeSOC 47-2131$54,740/yr
Versus the national pricetrade pay here runs −4.6% against the U.S. mean−$39
Climate zone 5BIECC R402.1.3 asks for R-60 in the attic at zone 5. 6,641 heating degree days and 614 cooling degree days is what that zone is standing in for

Notes

  • Where the number comes from. The national price for blown-in attic insulation is $1.90 per ft² of attic floor — blown-in insulation pricing published for 2026, $1.00–$2.80 per ft². Labor is about 45% of that. Insulation Workers, Floor, Ceiling, and Wall near Manchester, NH average $52,220 a year against a U.S. mean of $54,740 — a factor of 0.954 — so the labor half is scaled by that and the material half is not. Source: BLS does not publish a metro figure for insulation workers, floor, ceiling, and wall near Manchester, NH, so this is the New Hampshire state average, SOC 47-2131.
  • This one falls back to a wider average. BLS did not publish a metro-level wage for this trade near Manchester, NH, so the figure above is a state average. It is still the right order of magnitude, but a local bid carries more weight here than it would in a large metro where the survey has more responses.
  • Climate zone 5B. IECC R402.1.3 asks for R-60 in the attic at zone 5. 6,641 heating degree days and 614 cooling degree days is what that zone is standing in for.
  • What is in the price: blown fiberglass or cellulose to about R-49, baffles at the eaves, and labor.
  • What is not: removing existing insulation, air sealing before the blow, and any knob-and-tube remediation. These are the lines that turn a $1,861 quote into a $2,326 invoice, so ask about each one before signing.
  • Use this as a bid check, not a quote. It prices an average job in average condition. Difficult access, the state of what is being replaced, the season, and a crew booked out three months all move the real number, and none of them are in a per-unit average.

blown-in attic insulation in Manchester, NH

$1,861 is the typical number, and three bids on the same scope normally land between $979 and $2,742.

That is $39 less than the same job priced at the national average.

Why the city changes the number

About 45% of this job is labor — $837 of the $1,861 above. Labor is the only part that moves locally; a bundle of material costs what it costs wherever it is nailed down.

Insulation Workers, Floor, Ceiling, and Wall near Manchester average $52,220 a year, against a U.S. mean of $54,740. That is a factor of 0.954, so the labor half is scaled by it and the material half is not.

Source: BLS does not publish a metro figure for insulation workers, floor, ceiling, and wall near Manchester, NH, so this is the New Hampshire state average, SOC 47-2131.

What the quote should include

Climate zone 5B

The lines that turn a quote into an invoice

Ask about each of them before you sign. On a job this size they are the difference between $1,861 and something a quarter higher.

Use it as a bid check, not a quote

This prices an average job in average condition. Access, the state of what is being replaced, the season, and a crew booked out three months all move the real number, and none of them are in a national average.

If a bid lands outside $979 – $2,742, that is not automatically wrong — but it is the question worth asking out loud.

Nearby sizes

Read more